Assembling the remaining thread monitor
2.2.2 Connecting the remaining thread monitor on PREMIUM
machines
To connect the remaining thread monitor:
• For XXX PREMIUM machines: Remove the valve cover
• For XXX-M PREMIUM machines: Remove the motor cover
Fig. 6: Connecting the remaining thread monitor on PREMIUM machines (1)
①
(1) - Circuit board
1. Loosen the circuit board (1).
To do so, push the circuit board (1) down and off the white spacers.
2. Screw the connection plate and magnet valve together.
10
Additional Instructions 867/867-M PREMIUM - 00.0 - 07/2018