Vehicle Data - Mercedes-Benz S-Class Owner's Manual

Information on coolant is available at the fol‐
lowing locations:
in the Mercedes-Benz Specification for
R
Operating Fluids 310.1
at http://bevo.mercedes-benz.com
-
in the Mercedes-Benz BeVo app
-
at a qualified specialist workshop
R
* NOTE Overheating at high outside tem‐
peratures
If an inappropriate coolant is used, the
engine cooling system is not sufficiently pro‐
tected against overheating and corrosion at
high outside temperatures.
Always use coolant approved by
#
Mercedes-Benz.
Observe the instructions in the
#
Mercedes-Benz Specifications for Oper‐
ating Fluids 310.1.
Have the coolant regularly replaced at a qualified
specialist workshop.
The proportion of corrosion inhibitor/antifreeze
concentrate in the engine cooling system should
be:
a minimum of 50% (antifreeze protection
R
down to approximately -37 °C)
a maximum of 55% (antifreeze protection
R
down to -45 °C)
Notes on windscreen washer fluid
Observe the notes on operating fluids
( page 530).
→
& WARNING ‑ Risk of fire and injury due to
windscreen washer concentrate
Windscreen washer concentrate is highly
flammable. It could ignite if it comes into
contact with hot engine component parts or
the exhaust system.
Make sure that no windscreen washer
#
concentrate spills out next to the filler
opening.
Technical data 539
* NOTE Blocked spray nozzles caused by
mixing windscreen washer fluids
Do not mix MB SummerFit and MB Win‐
#
terFit with other windscreen washer flu‐
ids.
Do not use distilled or de-ionised water as the fill
level sensor may be triggered erroneously.
Recommended windscreen washer fluid:
Above freezing point: e.g. MB SummerFit
R
Below freezing point: e.g. MB WinterFit
R
For the correct mixing ratio, refer to the informa‐
tion on the antifreeze container.
Mix the washer fluid with the windscreen washer
fluid all year round.

Vehicle data

Vehicle dimensions
The heights specified may vary as a result of:
tyres
R
load
R