Mercedes-Benz S-Class Owner's Manual page 520

518 Wheels and tyres
Removing and fitting hub caps
Requirements:
The vehicle is prepared for a wheel change
R
( page 517).
→
Plastic hub cap
To remove: turn the centre cover of the hub
#
cap anti-clockwise and remove the hub cap.
To fit: make sure that the centre cover of the
#
hub cap is turned anti-clockwise.
Align centre cap 2 on the rear side of
#
centre cover 3 of the hub cap on one lug
hole 1.
Position the hub cap and turn the centre
#
cover clockwise until the hub cap engages
physically and audibly.
Aluminium hub cap
To remove: position socket 2
#
1.
%
The socket can be found in the tyre-change
tool kit.
Position wheel spanner 3 on socket 2.
#
Using wheel spanner 3, turn hub cap
#
anti-clockwise and remove it.
To fit: position hub cap 1 and turn until it is
#
completely flush with the wheel.
Position socket 2 on hub cap 1.
#
on hub cap
1