132 Seats and stowing
Press button 1.
#
The rear seat is selected if the indicator lamp
in the button does not light up.
Adjust the rear seat using the buttons in the
#
door control panel (
page 110).
→
Example: vehicles without a reclining rear seat
Briefly press memory button M and then
#
press preset position button 1, 2 or 3 within
three seconds.
The settings for the rear seat are stored in
the selected memory position.
%
Vehicles with reclining rear seat: you can‐
not store any settings on the j button for
adjusting the reclined position.
Calling up
Press button 1.
#
The rear seat is selected if the indicator lamp
in the button does not light up.