Processing A Credit Card Transaction (Magstrip/Non-Chip) - VeriFone VX520 Operation Procedure

PROCESSING A CREDIT CARD TRANSACTION (MAGSTRIP/NON-CHIP)

 Perform SECURITY CHECKS on the card presented by the customer
 Swipe the customer's card along the card reader on the right hand side of the terminal with
the magstripe facing inside
 Enter the last four (4) digits of the credit card number, and then press the 'ENTER' key
 Enter SALE AMOUNT and then press the 'ENTER' key
 The terminal then goes through a process of communicating and upon completion prompts
'APPROVED'
 The terminal generates a receipt automatically. (
 The screen then reads 'Print Cust Copy' , prompting the merchant to select
 The second receipt is generated once 'F1 – Yes' is selected
 The terminal then reads 'Return Customer Card'
 Press 'Cancel' (
Note
1. The Security Checks involve: (a) Checking the Card Number, (b) Verifying the Printed Number, (c)
Checking the Hologram, (d) Checking the Signature, (e) Checking the Logo (f) Verifying the Expiry Date,
(g) Verifying Name on Card is SAME on Valid Photo ID
2. The last (4) four digits of the Credit Card Number are on the front of the Credit Card presented.
F1 – Yes
F2 – No
red key
) to revert to the 'Home Screen'
This is the merchant's copy
3
)