Avaya J100 Series Installing And Administering page 264

Customizable parameters
Parameter name
L2Q
July 2019 Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Default Description
value
0 Specifies whether the VLAN
tagging is enabled or disabled.
Value operation:
• 0: Auto. VLAN tagging is turned
on when the network can support
VLAN tagging and L2QVLAN is
non zero.
• 1: On. VLAN tagging is turned on
when the network can support
VLAN tagging. The IP phone
sends tagged frames with VLAN
= L2QVLAN, even if L2QVLAN is
set to 0.
• 2: Off. VLAN functionality is
disabled.
Note:
This parameter can also be
set through:
• Local admin procedure
• A name equal to value pair
in DHCPACK message
• SET command in a settings
file
• DHCP option 43
• LLDP
Table continues...
264