Avaya J100 Series Installing And Administering page 106

Phone configuration
Name
Subnet Mask
Gateway IP Address
WEP
WEP Key Length
WEP Default Key
WEP Key 1
July 2019
Description
Specifies the Wi-Fi network mask address.
The valid value is the IP address in the dotted decimal name
format. The maximum number of characters is 15.
The default value is "0.0.0.0".
Specifies the IP address of the gateway in the Wi-Fi network.
The valid value is the IP address in the dotted decimal name
format. The maximum number of characters is 15.
The default value is "0.0.0.0".
Specifies the passcode key length for WEP security.
The options are:
• 64 bit
• 128 bit (default)
Specifies the default key in your Wi-Fi network.
The options are:
• WEP Key 1 (default)
• WEP Key 2
• WEP Key 3
• WEP Key 4
Specifies the WEP key values in the Wi-Fi network.
The valid value is up to 26 alphanumeric characters that can be
the following:
• Blank
• 0 – 9
• A – F
The value must include 10 hexadecimal digits for 64 bit keys
and 26 hexadecimal digits for 128 bit keys. The default value is
empty.
Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Table continues...
106