Avaya J100 Series Installing And Administering page 227

Parameter name
ASTCONFIRMATION
AUDASYS
AUDIOENV
July 2019 Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
List of configuration parameters
Default Description
value
60 Specifies the number of seconds
that the phone waits to validate an
active subscription when it
subscribes to the avaya-cm-
feature-status package.
Valid values are 16 through 3600.
This parameter is not supported in
IP Office environment as there is no
subscription to Avaya-cm-feature-
status.
3 Specifies the audible alerting
setting for the phone.
Value operation:
• 0: Turns off audible alerting. User
cannot adjust ringer volume.
• 1: Turns on audible alerting. User
can adjust ringer volume, but
cannot turn off audible alerting.
• 2: Turns off audible alerting. User
can adjust ringer volume and can
turn off audible alerting.
• 3: Turns on audible alerting. User
can adjust ringer volume and can
turn off audible alerting.
Note:
Avaya J129 IP Phone does not
support this parameter.
0 Specifies the audio environment
index and enables you to customize
the phone's audio performance.
Valid values are 0 through299.
This parameter affects settings for
AGC dynamic range and handset
noise reduction thresholds. Always
consult Avaya before changing this
parameter.
Table continues...
227