Multiple Level Precedence And Preemption; Shared Control; Mlpp Configuration - Avaya J100 Series Installing And Administering

Shared Control

With the Shared Control feature (SC), you can control phones using a soft phone client. Phones
must be registered with Avaya Aura
SIP_CONTROLLER_LIST must be identical in both phones and should have same configuration.
A shared control session might not be established if multiple devices are registered to the same
user with the SC-enabled flag sent during registration, depending on the soft client
implementation.
Note:
• SIP signaling must be set to TLS for the phone and the soft client. For security reasons,
TCP is not supported with Shared Control.
• Avaya J100 Series IP Phones now supports the Shared Control feature on all phone
models.
Related links
Multiple Device Access

Multiple Level Precedence and Preemption

You can override other calls by making a priority call with precedence. You can manually dial the
extension number or select the extension from the Contacts or the Recents lists. The precedence
level is valid for only one call session. The available call precedence levels are:
• FO: Flash Override. Highest precedence
• FL: Flash
• IM: Immediate
• PR: Priority
• Routine: Lowest precedence. Routine is highlighted on the call session line if no call is made
within five minutes.
Note:
You can start a precedence call from Busy Indicator and Bridged Appearance but not from the
Team button.
This feature must be activated on the Avaya Aura

MLPP configuration

Use 46xxsettings file to set the following parameters:
July 2019
®
to establish a shared control connection. The value of
on page 167
Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
®
Communication Manager.
Feature configuration
169