Linksys EA2750 User Manual page 6

Back view
1. Power switch---- - Toggle to turn on/off the router.
2. Power port---- - Connect the included AC power adapter.
3. Wi-Fi Protected Setup™ button---- - Press to configure wireless security on Wi-Fi Protected
Setup-enabled network devices.
4. Indicator light---- - Stays on steadily while power is connected and following a successful Wi-Fi
Protected Setup connection. Flashes slowly during bootup, during firmware upgrades, and
during a Wi-Fi Protected Setup connection. Flashes quickly when there is a Wi-Fi Protected
Setup error.
5. Ethernet ports—Connect Ethernet cables to these blue gigabit (10/100/1000) ports, and to
wired devices on your network.
Note—For best performance, use CAT5e or higher rated cables on the Ethernet ports.
6. Internet port---- - Connect an Ethernet cable to this yellow gigabit (10/100/1000) port, and to a
broadband Internet cable/DSL or fiber modem.
Note—For best performance, use CAT5e or higher rated cables on the Ethernet ports.
7. USB 2.0 port—Connect and share USB drives on your network or on the Internet.
6