Linksys EA2750 User Manual page 50

2. Connect to the secure wireless name shown in the Quick Start Guide that came with your
router. (You can change the network name and password later during router setup.) If you
need help connecting to the network, refer to your device documentation. Note: You will not
have Internet access until router setup is complete.
3. Open a web browser and follow the instructions to complete your router's setup. If
instructions do not appear in the web browser, enter linksyssmartwifi.com in the browser's
address bar.
4. At the end of setup, follow the on-screen instructions to set up your Linksys Smart Wi-Fi
account.
Note--As part of the router setup process, you will be sent a verification e-mail. From your home
network, click the link in the e-mail to associate your router with the Linksys Smart Wi-Fi account.
Make sure that the link opens in a supported web browser, such as Internet Explorer 8 or higher,
Firefox 8 or higher, Google Chrome 10 or higher, and Safari 5 (for Mac) or higher.
To add another router to share an Internet connection (cases 1 and 2 above):
Note---- - This is a complex process, so this procedure assumes that you have some networking
knowledge.
1. Determine the IP address range for your upstream (office or building) network.
To determine the address range by using a Windows computer:
a. Connect your computer to your upstream network's router.
b. Click Start, Run, type CMD, then click OK. The command prompt window appears.
c. Type "ipconfig," then press Enter.
Tip---- - Although you can determine your computer's IP address in many ways, this method
is quick and relatively easy.
d. Take note of the IP address. For this example, the IP address will be
192.168.100.192.
To determine the address range by using a Mac computer:
a. Connect your computer to your upstream network's router.
b. From the Dock, click System Preferences, click Network, then click Ethernet (or
Ethernet
c. Take note of the IP address. For this example, the IP address is 192.168.100.139.
) in the window to the left. A network status window opens.
USB
50