Recommended Maintenance Schedule(S) - Toro Workman 07040 Operator's Manual

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 5 hours
After the first 8 hours
After the first 50 hours
After the first 100 hours
Before each use or daily
Every 50 hours
Every 100 hours
Every 200 hours
Every 300 hours
Every 400 hours
Every 800 hours
Every 1,000 hours
Yearly
Maintenance Procedure
• Change the engine oil.
• Check the condition of the drive belt.
• Check the tension of the starter-generator belt.
• Check the air filter for the carbon canister.
• Perform the guidelines for breaking in a new machine.
• Check the tire pressure.
• Check the engine-oil level.
• Check gear-shift operation.
• Check the brake-fluid level.
• Remove the air-cleaner cover and clean out the debris. Do not remove the filter.
• Clean out the debris in the dust cap.
• Grease the bearings and bushings.
• Replace the air filter. Replace the air-filter element sooner if dirty or damaged.
• Service the air filter (more frequently in extreme dusty or dirty conditions).
• Change the engine oil.
• Check the spark plug.
• Check the condition of the tires and rims.
• Torque the wheel lug nuts.
• Check the front wheel camber and toe-in.
• Check the transaxle-fluid level.
• Check the operation of the neutral gear-shift position.
• Clean the engine-cooling areas.
• Inspect the brakes.
• Check the air filter for the carbon canister.
• Check the condition and tension of the drive belt.
• Check the tension of the starter-generator belt.
• Grease the front wheel bearings.
• Inspect the fuel lines and connections.
• Replace the fuel filter.
• Clean the primary-drive clutch.
• Change the transaxle fluid.
• Change the brake fluid.
• Complete all of the yearly maintenance procedures that are specified in the engine
owner's manual.
27