Engine Maintenance; Engine Safety; Servicing The Air Cleaner - Toro Workman 07040 Operator's Manual

Figure 37
1. Cotter pin
2. Nut retainer
9. Install the cotter pin and bend each legs around
the retainer (Figure
10. Install the dust cap onto the hub
11. Repeat steps 1 through
at the other side of the machine.
Installing the Brakes and Wheels
1. Clean the 2 flange-head bolts (3/8 x 3/4 inch)
and apply a coat of anti-seize compound to the
threads of the bolts.
2. Align the brake pads to either side of the rotor
(Figure 32) and the holes in the caliper bracket
with the holes in the brake mount of the spindle
frame (Figure 36).
3. Assemble the caliper bracket to the spindle
frame (Figure 32) with the 2 flange-head bolts
(3/8 x 3/4 inch), and torque the bolts to 47 to 54
N∙m (35 to 40 ft-lb).
4. Align the holes in the wheel to the studs of the
hub and assemble the wheel to the hub with the
valve stem outward
Note:
Ensure that the mounting surface of the
wheel is flush with the hub.
5. Secure the wheel to the hub with the lug nuts
(Figure 31), and torque the nuts to 108 to 122
N∙m (80 to 90 ft-lb).
6. Repeat steps 1 through
wheel at the other side of the machine.
3. Dust cap
37).
(Figure 37).
10 for the hub and rotor
(Figure 31).
5 for the brake and

Engine Maintenance

Engine Safety

•
Shut off the engine, remove the key, and wait for
all moving parts to stop before checking the oil or
adding oil to the crankcase.
•
Keep your hands, feet, face, clothing, and other
body parts away from the muffler and other hot
surfaces.
g192345

Servicing the Air Cleaner

Service Interval: Every 100 hours Replace the
Note:
Service the air cleaner more frequently (every
few hours) if operating conditions are extremely dusty
or sandy.
Servicing the Air-Cleaner Cover
Service Interval: Every 50 hours—Remove the
Every 50 hours
Check the air-cleaner body for damage which could
cause an air leak. Replace a damaged air-cleaner
body.
Clean the air-cleaner cover and remove the debris
from the dust cap as shown in
35
air-filter element sooner if dirty or
damaged.
air-cleaner cover and clean out the
debris. Do not remove the filter.
Figure 38.