Step 3 : Connecting The Vcr; If Your Tv Does Not Have A Scart (Euro-Av) Connector - Sony SLV-SE610G Operating Instructions Manual

Step 3 : Connecting the VCR

If your TV has a Scart (EURO-AV) connector, see page 16.

If your TV does not have a Scart (EURO-AV) connector

Mains lead
to mains
: Signal flow
1
Disconnect the aerial cable from
your TV and connect it to
AERIAL IN on the rear panel of
the VCR.
2
Connect AERIAL OUT of the
VCR and the aerial input of your
TV using the supplied aerial cable.
3
Connect the mains lead to the mains.
Note
• When you connect the VCR and your TV only with an aerial cable, you have to
tune your TV to the VCR (see page 21).
AERIAL IN
AERIAL OUT
AERIAL IN
Aerial cable (supplied)
AERIAL
ANTENNE
IN
ENTREE
OUT
SORTIE
AERIAL
ANTENNE
IN
ENTREE
OUT
SORTIE
continued
Connecting the VCR
15