Sony SLV-SE610G Operating Instructions Manual page 45

7
Press
DIAL TIMER
The programme position or station name appears in the display
window.
8
Turn
DIAL TIMER
To record from another source connected to one or more of the
LINE inputs, turn
display the connected line in the display window.
INPUT SELECT
9
Press
DIAL TIMER
"OK" appears in the display window for about five seconds.
The
by for recording.
To record from another source, leave the connected equipment
switched on.
To return to the previous step
To return to the previous step, press the PROGRAM + and – buttons on the
VCR at the same time during any of the Dial Timer settings.
To stop recording
To stop the VCR while recording, press x STOP.
To use the VCR after setting the timer
To use the VCR before a recording begins, just press ?/1. The
turns off and the VCR switches on. Remember to press ?/1 to reset the VCR
to recording standby after using the VCR.
You can also do the following tasks while the VCR is recording:
• Reset the counter (page 38).
• Display tape information on the TV screen (page 40).
• Check the timer settings (page 61).
• Watch another TV programme (page 41).
DIAL TIMER.
DIAL TIMER to set the programme position.
DIAL TIMER or press INPUT SELECT to
DIAL TIMER to complete the setting.
indicator appears in the display window and the VCR stands
Recording TV programmes using the Dial Timer (SLV-SE810G only)
VIDEO SP OPC
VIDEO SP OPC
indicator
continued
45