Sony SLV-SE610G Operating Instructions Manual page 16

If your TV has a Scart (EURO-AV) connector
Mains lead
to mains
: Signal flow
1
2
3
4
Note
• If the TV is connected to the LINE-1 (TV) connector, setting the RF channel to
OFF is recommended. In the OFF position, only the signal from the aerial is
output through the AERIAL OUT connector (see page 22).
16
Connecting the VCR
i LINE-1
(TV)
Scart cable (not supplied)
Disconnect the aerial cable from
your TV and connect it to
AERIAL IN on the rear panel of
the VCR.
Connect AERIAL OUT of the
VCR and the aerial input of your
TV using the supplied aerial cable.
Connect LINE-1 (TV) on the VCR
and the Scart (EURO-AV)
connector on the TV with the
optional Scart cable.
This connection improves picture
and sound quality. Whenever you
want to watch the VCR picture,
press t TV/VIDEO to display
the VIDEO indicator in the
display window.
Connect the mains lead to the mains.
AERIAL IN
AERIAL OUT
AERIAL IN
Aerial cable (supplied)
Scart
(EURO-AV)
AERIAL
ANTENNE
IN
ENTREE
OUT
SORTIE
AERIAL
ANTENNE
IN
ENTREE
OUT
SORTIE