Preparation; Connecting The Vcr - Sony ShowView HV-FX7950N Operating Instructions Manual

PREPARATION

Connecting the VCR

Basic connections
4
To AC outlet
1
Disconnect the antenna cord from your TV and connect it to
the AERIAL jack on this VCR.
2
Connect the supplied antenna cord to the RF. OUT jack on the
VCR and the antenna jack on your TV.
3
Connect the optional 21-pin scart cord to the EURO AV1
AUDIO/VIDEO jack on the VCR and the 21-pin scart jack on
your TV.
This connection is recommended as an easier way to set-up the VCR, and
improves the picture and sound quality.
If you do not use this connection, go to the next step.
4
Connect the power cord to the AC outlet.
Notes
• All connections should be made with both the VCR and your TV unplugged from the AC outlet.
• If your TV has more than one 21-pin scart jack, please refer to the TV operation instructions.
• If you do not have a house hold antenna jack or you are uncertain of it, you should seek the advice of a local antenna dealer.
Additional connections
To connect a stereo system
This connection improves the sound quality. If you connect a stereo system, you can listen to NICAM/A2 sound from the
speakers of the system.
Connect the AUDIO OUT L/R jacks of the VCR to the audio input jacks of the stereo system using the optional audio cord.
Stereo system
to audio input jacks
4
ENGLISH
ENTREE
ANTENNE
AERIAL
SORTIE
ANTENNE
EURO AV1
AUDIO/
VIDEO
RF.OUT
2
Antenna cord
(supplied)
3
21-pin scart cord
(not supplied)
Audio cord (not supplied)
1
Cable box
Antenna cord
(not supplied)
Satellite receiver
TV
To antenna jack
To 21-pin scart
jack
AUDIO
SORTIE OUT
G
D
or
or
ENTREE
ANTENNE
L
R