Setting The Recording Duration Time - Sony SLV-SE610G Operating Instructions Manual

Setting the recording duration time

After you have started recording in the normal way, you can have the VCR stop
recording automatically after a specified duration.
Before you start
• Refer to "Index to parts and controls" for button locations.
While recording, press z REC.
1
The
Press z REC repeatedly to set the duration time.
2
Each press advances the time in increments of 30 minutes.
The tape counter decreases minute by minute to 0:00, then the VCR stops
recording and turns off automatically.
To extend the duration
Press z REC repeatedly to set a new duration time.
To cancel the duration
Press z REC repeatedly until the
returns to the normal recording mode.
To stop recording
To stop the VCR while recording, press x STOP.
Note
• You cannot display the current tape time in the display window when setting the
recording duration time.
58
Setting the recording duration time
...
indicator appears in the display window.
0:30 1:00 5:30
indicator disappears and the VCR
VIDEO SP OPC
Normal recording
6:00