Table of Contents
Advertisement
time counter and the remaining time appear alternately. The
indicates the remaining time.
SP
0 : 0 0 : 2
Time counter
In order to get an accurate remaining time indication, be sure TAPE
LENGTH in the OPTIONS-1 menu is set according to the tape type you use
(see page 77).
To watch another TV programme while recording
Press t TV/VIDEO to turn off the VIDEO indicator in the display
1
window.
2
Select another programme position on the TV.
To save a recording
To prevent accidental erasure, break off the
safety tab as illustrated. To record on the
same tape again, cover the tab hole with
adhesive tape.
Tips
• To select a programme position, you can use the
programme number buttons on the remote
commander. For two-digit numbers, press the
- (ten's digit) button followed by the programme number buttons.
• If you connect additional equipment to a LINE connector or jack, you can select
the input signal using the INPUT SELECT or PROG +/– buttons.
• The
DISPLAY information appears on the TV screen indicating information
about the tape, but the information won't be recorded on the tape.
• If you don't want to watch TV while recording, you can turn off the TV.
Notes
• The
DISPLAY information does not appear during still (pause) mode or slow-
motion playback.
• The
DISPLAY information will not appear while playing an NTSC-recorded
tape.
2
indicator
1 : 4
Remaining time
Safety tab
continued
Recording TV programmes
6
41
Hide quick links:
Advertisement
Table of Contents
