Setting Your Personal Code - Sony SLV-SE610G Operating Instructions Manual

Setting your personal code

For identification, you can enter a
personal code into the VCR. Once you
enter your personal code, you can
confirm it any time but can never change
it. Please make a note of the code to
quote to the police if your VCR is stolen.
Before you start...
• Turn on your TV and set it to the video
channel.
• If there is a tape in the VCR, remove it.
• Turn off the VCR.
1
2
PLAY
OK
3
PLAY
OK
36
Setting your personal code
Hold down X (pause) and ?/1 (on/
standby) on the VCR simultaneously
for more than three seconds.
Enter your personal code.
1 Press M/m to select a character.
Each time you press M, the character
changes as shown below.
A t B t ... t Z t 0 t 1 t ...
t 9 t (blank space) t -
(hyphen) t A
2 Press , to set the next character.
The next space is highlighted.
To correct a character, press </, until the character you want to
correct is highlighted, then reset it.
You can set up to 11 characters for your personal code.
Press OK.
A confirmation screen appears.
?/1
SECURITY FUNCTION
PERSONAL CODE
– – – – – – – –
SELECT :
SET :
CONFIRM : OK
SECURITY FUNCTION
PERSONAL CODE
WB–1 5 7 8 –
SELECT :
SET :
CONFIRM : OK
SECURITY FUNCTION
PERSONAL CODE
FINAL CONFIRM
CANCEL
X
– – –
EXIT : MENU
– – –
EXIT : MENU
WB–1 5 7 8 – – – –
: OK
: CLEAR
EXIT : MENU