Not Available On Slv-Se610G; The Video Plus+ System - Sony SLV-SE610G Operating Instructions Manual

2
Press the programme number
1 2 3
buttons to enter the PlusCode
4 5 6
number.
7 8 9
If you make a mistake, press
0
CLEAR and re-enter the correct
number.
CLEAR
3
Press OK.
The date, start and stop times,
PLAY
programme position or station name,
OK
tape speed, and VPS/PDC setting
appear on the TV screen.
INPUT SELECT
• If "– –" appears in the "PROG."
CLEAR
If the information is incorrect, press CLEAR to cancel the setting.
4
If you want to change the date, tape
speed, and the VPS/PDC setting:
PLAY
1 Press </, to highlight the item
OK
2 Press M/m to reset it.
• To record the same programme
• To use the VPS/PDC function, set VPS/PDC to ON.
5
Press MENU to exit the menu.
MENU
Recording TV programmes using the VIDEO Plus+ system (not available on SLV-SE610G)
(programme) column (this may
happen for local broadcasts), you
have to set the appropriate programme position manually.
Press M/m to select the desired programme position.
To record from another source connected to one or more of the
LINE inputs, press INPUT SELECT to display the connected line
in the "PROG." position.
You will only have to do this operation once for the referred
channel. The VCR will then store your setting.
you want to change.
every day or the same day every
week, see "Daily/weekly
recording" on page 50.
For details about the VPS/PDC function, see "Timer recording
with VPS/PDC signals" on page 50.
VIDEO Plus+
2 8 . 9
PLUSCODE NO.
1 2 4 6 – – – – –
SET : 0–9
CONFIRM : OK
CANCEL : CLEAR
EXIT :
TIMER
2 8 . 9
DATE TIME
TODAY 1 9 : 0 0 2 0 : 0 0
SP / LP SP VPS / PDC
LIST
SELECT :
SET :
CANCEL : CLEAR
EXIT :
TIMER
2 8 . 9
DATE TIME
TODAY 1 9 : 0 0 2 0 : 0 0
SP / LP SP VPS / PDC
LIST
SELECT :
SET :
CANCEL : CLEAR
EXIT :
continued
FRI
MENU
FRI
PROG.
3 5
OFF
MENU
FRI
PROG.
3 5
ON
MENU
49