Table of Contents
Advertisement
9-1 Overview
The function menu allows you to make frequently
made settings, such as selection of input video signals
and time code settings.
9-1-1 Function Menu
Configuration
The function menu consists of seven pages by factory
default: the HOME page and six pages numbered 1 to
6. You can also display the HOME2 page by setting
user-defined function keys. The following icons appear
at the left edge of the menu display section to denote
the current page.
: HOME page
1
: Page 1
1
: Page 2
2
: Page 3
3
: Page 4
4
: Page 5
5
: Page 6
6
: HOME 2 page
2
Each page has a menu display section made up of an
upper and lower part. The upper part displays the
menu items (functions) in the page, and the lower part
displays the menu item settings. The figure below
shows the menu display section in the HOME page.
Function Menu
In the figure above, SDI (HD Serial Digital Interface
signal) is selected as the setting for VID.IN (input
video signal selection), the menu item for button F1.
This manual refers to this as "F1 (VID.IN) in function
menu HOME page is set to SDI."
Chapter
Menu items (functions)
VID. IN PB/EE CONFI CTL/TC
SDI
EE
DISABL TC
HOME
F1
F2
F3
Settings (values)
Chapter 9 Function Menu
9
MENU TCGSET
F4
F5
F6
9-1
Advertisement
Table of Contents
