Table of Contents
Advertisement
10-4 Items in the Extended Setup Menu
Menu items in the range 300 to 399, relating to editing operations (Continued)
Item number Item name
317
AUDIO EDIT MODE
318
EDIT RETRY
319
PREREAD SELECT
DIGITAL AUDIO PB
320
PROCESS ON EDIT
POINT
(Invalid in 24PsF or
23.98PsF mode)
326
AUTOMATIC IN ENTRY
AFTER AUTO EDIT
10-16
Chapter 10 Setup Menus
Settings
Select the type of audio transition used for digital audio editing.
CUT: Cut editing (audio discontinuity at transition point, and possible noise during
playback).
[CROSS]: Cross-fade
FI/FO: Fade in and out
t: Time set by item 803 DIGITAL AUDIO FADE TIME
For two-VTR editing, set when this unit is used as the recorder. Selects the
operation if the recorder was not synchronized in time.
OFF: Editing is not carried out, and the unit stops.
[ON]: The editing is automatically retried (up to twice).
Specify the preread operation.
[A/V]: Preread for both audio and video.
AUDIO: Preread for audio only.
VIDEO: Preread for video only.
The preread operation is enabled when the function menu item PREREAD is set
to ON or with a command from the 9-pin remote control interface.
Select the treatment of audio playback at edit points.
[CUT]: Carry out a cut (possibly resulting in audio discontinuities at the edit point).
FADE: Fade out and fade in.
Select whether or not to automatically set the OUT point of the previous edit as
the next IN point at the end of an automatic edit.
[OFF]: No automatic setting
R: Set recorder IN point automatically.
R & P: Set recorder IN point automatically, and also player IN point in two-VTR
editing.
IN/OUT
t
IN/OUT
t
(Continued)
Advertisement
Table of Contents
