Table of Contents
Advertisement
Item number Item name
703
BLANK LINE SELECT
(Invalid in 24PsF or
23.98PsF mode)
Sub-Item
0
ALL LINE
In 59.94i,
12 ...
LINE 12 ... LINE
29.97PsF
19
19
mode
20
LINE 20
In 50i, 25PsF
9 ...
LINE 9 ... LINE 22 Specify blanking for lines 9 to 22.
mode
22
23
LINE 23
705
EDGE SUBCARRIER
REDUCER MODE
(Invalid in 24PsF or
23.98PsF mode)
707
FORCED VERTICAL
INTERPOLATION OFF
709
CAV LEVEL FORMAT
(Valid only in 59.94i or
29.97PsF mode)
Sub-Item
0
OUTPUT CAV
LEVEL
a) The "Y-add" function is a circuit operation to interpolate
the video signal vertically during jog or variable speed
playback for the purpose of reducing the vertical
movement of the playback picture.
Menu items in the range 700 to 799, relating to video control
Settings
Switch blanking on or off for individual lines in the vertical blanking interval of the
SD video signal. The Y/C signal and odd/even fields are blanked simultaneously.
[- - -]: Specify the blanking for each line separately.
BLANK: Regardless of the setting of other sub-items, blank all lines which can be
specified in this menu item.
THROU: Regardless of the setting of other sub-items, switch off blanking for all
lines which can be specified in this menu item.
Specify blanking for lines 12 to 19.
[BLANK]: Carry out blanking.
THROU: Switch off blanking.
Specify blanking for line 20.
[BLANK]: Carry out blanking.
HALF: Carry out half-blanking.
THROU: Switch off blanking.
[BLANK]: Carry out blanking.
THROU: Switch off blanking.
Specify blanking for line 23.
[HALF]: Carry out half-blanking.
THROU: Switch off blanking.
During recording and playback of a composite signal, in the playback circuit the
edge subcarrier reducer (ESR) is automatically switched on or off according to
the VTR operation. When recording a "Non-Standard" signal, for example, if the
color edges are not as good as with a proper signal, the ESR can be forced on.
This item makes this selection.
[AUTO]: ESR is switched on and off automatically.
ON: ESR operation is forced on.
The "Y-add"
a)
function is normally switched on automatically during jog or variable
speed playback. This item selects whether or not to force the "Y-add" function
off.
[AUTO]: Automatically switch the "Y-add" function on.
OFF: Force the "Y-add" function off.
Select whether the analog component output should be D-1 or Betacam.
Format
Color bars
D-1 CAV
100/0/100/0
Betacam
100/7.5/77/7.5 714 mV
Select the analog component output format.
[B-CAM]: Betacam
D1: D-1
Y video
Y sync
700 mV
300 mV
286 mV
Chapter 10 Setup Menus
R–Y/B–Y
700 mV
700 mV
(Continued)
10-23
Advertisement
Table of Contents
