Delete Records - Fluke MultiFiber Pro User Manual

MultiFiber Pro Optical Power Meter and Fiber Test Kits
Users Manual

Delete Records

You can delete one set of 12 records, or you can delete all
the records in memory.
To delete one set of 12 records
When you delete a set of 12 records, that set stays
empty until you delete all records and save new
ones.

1 Hold down until the setup menu shows, press
 
to put the cursor next to VIEW RECORD, then

press .
   
2 Use or to select the set of records to
delete. See Figure 11 on page 27.

3 Press DELETE. The display shows DELETE?.
To exit the delete mode and not delete the records,
  
press , , or .

4 Hold down DELETE? until OK shows. The 12 fibers

show for their measurements, and no bargraphs
show.
5 To exit the view record mode, press
26
Note

.
To delete all the records in memory

1 Hold down until the setup menu shows, press
put the cursor next to VIEW RECORD, then press

2 Hold down DELETE until the display shows DELETE

ALL?, then release .
To exit the delete mode and not delete the records,
  
press , , or .
3 To delete all records, hold down
the meter deletes the records, the display shows the
percentage of records deleted. At
shows. Then the meter goes back to the power or loss
measurement mode

to

.

DELETE ALL?. As

percent, OK