ESA614
Users Manual
Delete an Operator Name
To delete an operator name:
1.
From the Setup menu, push or until the
Operator name is highlighted.
2.
Push .
3.
From the Operator list, push or to highlight one
of the operator names.
4.
Push the Delete softkey.
5.
A delete confirmation screen shows.
6.
Push the Delete softkey.
Set the Date
From the Setup menu, push or until the Date value
is highlighted.
1.
Push .
2.
In the Keyboard screen, push or to move the
highlight to a character.
3.
Push .
4.
Do steps 2 and 3 again until the date is complete.
5.
Push the Done softkey.
Push the Back softkey to delete the last
character in the date field.
18
Note
Set the Time
1.
From the Setup menu, push or until the Time
value is highlighted.
2.
Push .
3.
In the Keyboard screen, push or to move the
highlight to a character.
4.
Push .
5.
Do steps 3 and 4 again until the time is complete.
When you set the time for 12-hour format, push
the am/pm softkey to set AM or PM.
6.
Push the Done softkey.
Push the Back softkey to delete the last
character in the date field.
Note
Note