MultiFiber Pro Optical Power Meter and Fiber Test Kits
Users Manual
Figure 7. Power Measurement Display
14
The difference (in dB) between the level of power on
each channel and the maximum power of all 12
channels:
I
No ovals
At regular intervals, the meter finds the maximum
power level again and adjusts the bargraphs as
H
necessary.
The channel for the measurement shown (
change the channel, press
POLARITY: The polarity of the connections between the
meter and source:
The polarity indication shows on the meter only
when the source's SCAN ALL function is on and all
fibers are connected.
GUE06.EPS
A, B, C: The connections use a standard method, A, B,
or C. See Figure A-1 on page 38.
POLARITY ?: The connections do not use a standard
method, one or more fibers are not connected, or
SCAN ALL is off on the source.
Max.
). To
.
Note