Keys And Connectors - Fluke MultiFiber Pro User Manual

Keys and Connectors

B
Figure 2. Meter and Source Features
D
E
C
A
GUE05.EPS
 
: On/off key.
   
: Softkeys. The function for each key shows
above the key. For access to user preferences, hold
 
down and for 2.5 seconds. See "How to Change
User Preferences" on page 9.
  
: Meter: Press to change the measurement
mode. For access to a menu of test settings and the
VIEW RECORD mode, hold down

See item in Figure 3 on page 6.
Source: To see modes for the source, hold down

2.5 seconds. See item

MTP/MPO connector with self-closing, protective cover.

For correct measurements, connect only APC
connectors to the singlemode sources. Connect
only non-APC connectors to the multimode
source. You can connect APC or non-APC
connectors to the meter.

USB port for uploading test records from the meter to
a PC. See "Upload Records to a PC" on page 28. You
can also use the port to install software updates. See
"Update the Software" on page 30.
Keys and Connectors

for 2.5 seconds.

in Figure 4 on page 8.
Caution
for
5