Participating in Meetings
Procedure
1. Access the call settings. From the XT Series web interface, select Basic Settings > Call-
Answer Mode > General. From the endpoint's main menu, select Configure > Calling.
2. Set Do Not Disturb to Yes.
3. Set DnD Mode to All Except Trusted.
4. From the web interface only, select Save.
Related links
Participating in Meetings
Using chat
About this task
(Requires chat support) When you are in an Avaya meeting, you can send and receive public (or
private) chat messages to other participants. If multiple users are controlling the same XT Series,
they can use the chat together, but all their messages are sent on behalf of the XT whose name is
shown as associated to their messages.
Chat is also available in the XT web interface.
Important:
If you use Scopia
the XT. All the users controlling the same XT as you, via Scopia
private messages.
Before you begin
Verify the XT Series supports chat (requires version 9.1).
Procedure
1.
In the participants's panel, tap
June 2019
on page 58
®
Control to send a private message to someone, you are acting on behalf of
to access the panel allowing to start or view a chat.
Avaya IX Video Conferencing XT Series User Guide
Comments on this document? infodev@avaya.com
®
Control, can see the XT's
76