Sony STR-DN1000 Operating Instructions Manual page 87

Menu Parameters
[Display] [Display]
Video settings Resolution
[<VIDEO>] [RESOLUTION]
Video input assignment
[V. ASSIGN]
VIDEO 1 ? c
VIDEO 2 ? c
BD ? c
DVD ? c
SAT ? c
SA-CD/CD ? c
Switching component signals
[COMP. DEC.]
HDMI settings Control for HDMI
[<HDMI>] [CTRL:HDMI]
Setting HDMI audio input
[AUDIO OUT]
Subwoofer level for HDMI
[SW LEVEL]
System settings Naming inputs
[<SYSTEM>] [NAME IN]
Brightness of the display
[DIMMER]
S-AIR settings S-AIR ID
[<S-AIR>] [S-AIR ID]
Pairing
[PAIRING]
S-AIR mode
[S-AIR MODE]
RF Change
[RF CHANGE]
S-AIR Standby
[S-AIR STBY]
a)
xxx represent a speaker channel (FL, FR, CNT, SL, SR, SB, SBL, SBR, SW).
b)
Depends on the speaker pattern setting, some parameters or settings may not be available.
c)
You can only select this parameter if "SP PATTERN" is not set to a setting with surround back speakers (page
73).
d)
You can only select this parameter if your speaker is set to "SMALL".
e)
You can only select this parameter if you select Cinema Studio A/B/C as sound field.
f)
This parameter is only available if the SiriusConnect Home tuner is connected to the SIRIUS jack on the
receiver.
g)
This parameter is only available when HDMI input signals are detected.
h)
This parameter is only available if the S-AIR transmitter (not supplied) is inserted to the EZW-T100 slot on
the receiver.
g)
h)
h)
h)
h)
h)
Settings
DIRECT, AUTO, 480/576i,
480/576p, 720p, 1080i
COMPONENT1, COMPONENT2,
COMPONENT3, COMPOSITE,
HDMI1, HDMI2, HDMI3, HDMI4,
NONE
DEC. ON, DEC. OFF
CTRL ON, CTRL OFF
AMP, TV+AMP
SW AUTO, SW +10 dB, SW 0 dB
For details, see "Naming the input
(Name Input)" (page 49).
0% DOWN, 40% DOWN,
70% DOWN
ID: A, ID: B, ID: C
START, CONDITION
PARTY, SEPARATE
RF AUTO, RF ON, RF OFF
STBY ON, STBY OFF
Initial
setting
AUTO
DEC. OFF
CTRL OFF
AMP
SW AUTO
0% DOWN
ID: A
START
PARTY
RF AUTO
STBY OFF
87 US