Sony STR-DN1000 Operating Instructions Manual page 10

About the indicators on the display
1 2 3
qk
Name Function
A SW
Lights up when subwoofer is
connected and the audio signal
is output from the
SUBWOOFER jack. While this
indicator lights up, the receiver
creates a subwoofer signal
based on the LFE signal in the
disc being played back or the
low frequency components of
the front channels.
B LFE
Lights up when the disc being
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
C Input
Light up to indicate the current
indicators
input.
COAX Lights up when INPUT MODE
is set to "AUTO" and the source
signal is a digital signal being
input through the COAXIAL
jack (page 108).
OPT Lights up when INPUT MODE
is set to "AUTO" and the source
signal is a digital signal being
input through the OPTICAL
jack (page 108).
HDMI The receiver recognizes a
component connected via an
HDMI IN jack.
DMPORT The DIGITAL MEDIA PORT
adapter is connected and
"DMPORT" is selected.
ANALOG
No digital signal is being input.
When INPUT MODE is set to
"ANALOG" or when the
"Analog Direct" is being
selected, it also lights up.
10 US
4 5
qj qh
Name
D Dolby
E Neural-THX
F DTS(-ES)
7
6
qg qf qd qs
Function
Lights up one of the respective
Digital indicators when the receiver is
Surround decoding the corresponding
indicators Dolby Digital format signals.
D
Dolby Digital
D EX Dolby Digital Surround EX
D+
Dolby Digital Plus
TrueHD Dolby TrueHD
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is set
to "AUTO" (page 108).
Lights up when the receiver
applies Neural-THX
processing to input signals.
Light up when DTS or DTS-
indicators ES signals are input.
DTS Lights up when the receiver is
decoding DTS signals.
DTS 96/24 Lights up when the receiver is
decoding DTS 96 kHz/24 bit
signals.
NEO:6
Lights up when DTS Neo:6
Cinema/Music decoder is
activated (page 66).
DTS-ES Lights up when the receiver is
decoding DTS-ES signals.
Note
When playing a DTS format
disc, be sure that you have
made digital connections and
that INPUT MODE is set to
"AUTO" (page 108).
8 9
qa q;