4B: Connecting The Video Components - Sony STR-DN1000 Operating Instructions Manual

4b: Connecting the video components

How to connect your
components
This section describes how to connect your
video components to this receiver. Before you
begin, see "Component to be connected"
below for the pages which describe how to
connect each component. Before connecting
cords, be sure to disconnect the AC power
cord (mains lead).
After connecting all your components,
proceed to "5: Connecting the antennas
(aerials)" (page 35).
Component to be connected
Component
TV
With HDMI jack
DVD player
Blu-ray disc player
Satellite tuner, Set-top box
DVD recorder, VCR
Camcorder, video game, etc.
If you want to connect several
digital components, but cannot
find an unused input
See "Enjoying the sound/images from other
inputs" (page 109).
Video input/output jacks to be
connected
The image quality depends on the connecting
jack. See the illustration that follows. Select
the connection according to the jacks on your
components.
Page
21
Note
26
Be sure to turn on the receiver when the video and
29
audio of a playback component are being output to a
TV via the receiver. If the power supply of the
30
receiver is not turned on, neither video nor audio is
31
transmitted.
32
32 Converting video signals
This receiver is equipped with a function for
up-converting video signals. For details, see
"Function for conversion of video signals"
(page 33).
COMPONENT VIDEO
Y
HDMI
P C
/
B B
P C
/
R R
Digital Analog
High quality image
VIDEO
25 US