Using The Sleep Timer; Changing The Brightness Of The Front Panel Display (Dimmer) - Sony STR-DN1000 Operating Instructions Manual

Using the Sleep Timer

You can set the receiver to turn off
automatically at a specified time.
Press SLEEP repeatedly while the
power is on.
Each time you press the button, the display
changes cyclically as follows:
0:30:00 t 1:00:00 t 1:30:00 t 2:00:00
t OFF
When Sleep Timer is activated, "SLEEP"
lights up in the display.
Tip
To check the remaining time before the receiver
turns off, press SLEEP. The remaining time appears
on the display. If you press SLEEP again, the Sleep
Timer will be canceled.
Changing the brightness
of the front panel display
(DIMMER)
You can change the brightness of the front
panel display.
1
Press AMP.
2
Press MENU.
3
Press V/v repeatedly to select
"SYSTEM", then press
4
Press V/v repeatedly to select
"DIMMER", then press
5
Press V/v repeatedly to select
the setting you want, then
press .
The front panel display will change the
brightness according to the setting you
have selected.
Tip
You can also press DIMMER repeatedly on the
receiver to change the brightness of the front panel
display.
or b.
or b.
111 US