Other Operations; Switching Between Digital And Analog Audio (Input Mode) - Sony STR-DN1000 Operating Instructions Manual

5
Press V/v repeatedly to select
the setting you want.
• ON: You can enjoy the S-AIR receiver
while the S-AIR main unit is in standby
mode or turned on.
• OFF: You cannot enjoy the S-AIR
receiver while the S-AIR main unit is in
standby mode.
To exit the menu
Press MENU.
Notes
• When you set "S-AIR Stby" to "ON", the power
consumption increases during the standby mode.
• When the wireless transmitter is not inserted in the
S-AIR main unit, you cannot set "S-AIR Stby".
• When the wireless transmitter is removed from the
S-AIR main unit, "S-AIR Stby" is set to "OFF"
automatically.
• If you have selected TUNER (FM/AM band) on
the S-AIR main unit before you turn it off and
"S-AIR Stby" is set to "ON", you can only select
the same band for the tuner on the S-AIR receiver.
However, you can select input other than TUNER
on the S-AIR receiver.
• The sound of the S-AIR receiver may be cut off by
operation of the S-AIR main unit.
108 US

Other Operations

Switching between
digital and analog audio
(INPUT MODE)
When you connect components to both digital
and analog audio input jacks on the receiver,
you can fix the audio input mode to either of
them, or switch from one to the other,
depending on the type of material you intend
to watch.
1
Press the input button.
You can also use the INPUT SELECTOR
+/– on the receiver.
2
Press INPUT MODE repeatedly
to select the audio input mode.
The selected audio input mode appears on
the display.
Audio input modes
x AUTO
Gives priority to digital audio signals when
there are both digital and analog connections.
If there are no digital audio signals, analog
audio signals are selected.
x ANALOG
Specifies the analog audio signals input to the
AUDIO IN (L/R) jacks.
Notes
• Some audio input modes may not be set up
depending on the input.
• When either HDMI input (HDMI 1/2/3/4), SIRIUS
or DMPORT input is selected, "------" appears on
the display, and you cannot select other modes.
Select an input mode other than the HDMI input
(HDMI 1/2/3/4), SIRIUS and DMPORT input,
then set the audio input mode.
• When "Analog Direct" is being used, audio input is
automatically set to "ANALOG". You cannot
select other modes.