Settings For Hdmi (Hdmi Settings Menu) - Sony STR-DN1000 Operating Instructions Manual

Settings for HDMI
(HDMI Settings menu)
You can make the required settings for
components connected to the HDMI jack.
HDMI Settings menu parameters
x Ctrl for HDMI (Control for HDMI)
Lets you turn the Control for HDMI function
on or off. For details, see "Preparing for the
"BRAVIA" Sync" (page 94).
• OFF
• ON
Note
When you set "Ctrl for HDMI" to "ON", "Audio
Out" may be changed automatically.
x Audio Out (Setting HDMI audio
input)
Lets you set the audio output for HDMI from
the playback component connected to the
receiver via an HDMI connection.
• AMP
The HDMI audio signals from the playback
component is only output to the speakers
connected to the receiver. Multi channel
sound can be played back as it is.
Note
Audio signals are not output from the TV speakers
when "Audio Out" is set to "AMP".
• TV+AMP
The sound is output from TV's speaker and
the speakers connected to the receiver.
Notes
• The sound quality of the playback component
depends on the TV's sound quality, such as the
number of channels, and the sampling
frequency, etc. When the TV has stereo
speakers, the sound output from the receiver is
also stereo as that of the TV, even if you play
back multi channel source.
• When you connect the receiver to an image
display component (projector, etc.), sound may
not be output from the receiver. In this case,
select "AMP".
• When you select the input that you have
assigned the HDMI input, sound does not output
from the TV.
x SW Level (Subwoofer level for
HDMI)
Lets you set the level of the subwoofer to 0 dB
or +10 dB when PCM signals are input via an
HDMI connection. You can set the level for
each HDMI input independently.
• AUTO
The subwoofer level is automatically set to
0 dB or +10 dB depending on the sampling
frequency.
• +10 dB
• 0 dB
81 US