Sony STR-DN1000 Operating Instructions Manual page 11

Name Function
G D.RANGE
Lights up when dynamic range
compression is activated.
H SP A/SP B/
Lights up according to the front
SP A+B speaker system used (page 38).
However, these indicators do not
light up if the speaker output is
turned off or if headphones are
connected.
I SLEEP
Lights up when the Sleep Timer is
activated.
J A.DIRECT Lights up when "Analog Direct"
is selected.
K Tuning
Lights up when the receiver tunes
indicators
in radio stations, or satellite radio
stations.
CAT The category mode is selected
during the satellite radio
operation.
MEM Lights up when a memory
function, such as Preset Memory
(page 54), etc., is activated.
MONO
Monaural broadcast
ST
Stereo broadcast
SIRIUS The SiriusConnect Home tuner is
connected and "SR" is selected.
L S-AIR
Lights up when the S-AIR
transmitter (not supplied) is
connected.
M Dolby
Lights up one of the respective
Pro Logic indicators when the receiver
indicators applies Dolby Pro Logic
processing to 2 channel signals in
order to output the center and
surround channel signals.
PL
Dolby Pro Logic
PL II Dolby Pro Logic II
PL IIx Dolby Pro Logic IIx
Note
These indicators do not light up
when either the center speaker and
surround speaker is not connected.
N BI-AMP
Lights up when "SB Assign" is set
to "BI-AMP" (page 113).
O EQ
Lights up when the equalizer is
activated.
Name Function
P DTS-HD
Lights up one of the respective
indicators indicators when the receiver is
decoding the corresponding
DTS-HD format signals.
DTS-HD DTS-HD Master Audio
MSTR
DTS-HD HI DTS-HD High Resolution
RES Audio
Q LPCM
Lights up when Linear PCM
(Pulse Code Modulation)
signals are input.
R Playback
The letters (L, C, R, etc.)
channel indicate the channels being
indicators
played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound (based on the speaker
settings).
L Front Left
R Front Right
C Center (monaural)
SL Surround Left
SR
Surround Right
S
Surround (monaural or the
surround components obtained
by Pro Logic processing)
SBL Surround Back Left
SBR Surround Back Right
SB Surround Back (the surround
back components obtained by
6.1 channel decoding)
Example:
Recording format (Front/
Surround): 3/2.1
Output channel: When "SP
Pattern" is set to "3/0.1"
(page 73, 85)
Sound Field: "A.F.D. Auto"
11 US