Sony STR-DN1000 Operating Instructions Manual page 43

Item Explanation
Distance Displays the measurement
result for speaker distance.
Level Displays the measurement
result for speaker level.
Exit Exits the setting process
without saving the
measurement results.
* When the speaker(s) is (are) out of the phase,
"OUT" is displayed on the TV screen. The
"+" and "–" terminals of the speaker may be
connected the other way around.
However, depending on the speakers, "OUT"
appears on the TV screen even though the
speakers are connected properly. This is
because of the speakers' specifications. In
this case, you can continue to use the
receiver.
3
Select "Save" in step 2 to save
the measurement result.
4
Press V/v repeatedly to select
the Auto Calibration Type, then
press .
Auto Calibration
Auto Cal. Type
Full Flat
Engineer
Front Reference
Off
RETURN
Parameter Explanation
Full Flat Makes the measurement of
frequency from each speaker
flat.
Engineer Sets the frequency to one that
matches that of the Sony
listening room standard.
Front Adjusts the characteristics of
Reference all the speakers to match the
characteristics of the front
speaker.
Off Sets the Auto Calibration to
off.
Tip
The size of a speaker ("Large"/"Small") is
determined by the low frequency characteristics.
The measurement results may vary, depending on
the position of the optimizer microphone and
speakers, and the shape of the room. It is
recommended that you follow the measurement
results. However, you can change those settings in
the Speaker Settings menu. Save the measurement
results first, then try to change the settings if you
want.
43 US