Siemens SIMATIC PCS 7 Configuration page 69

5 Diagnostics
5.4 HW Config Online
Diagnostic interrupt
The "Module state" of the signal module (Figure 5-5) is another diagnostic
possibility in HW ConFigure In the "Diagnostic Interrupt" tab you can find the
"Standard module diagnostics" and the "Channel-specific diagnostics".
Figure 5-5
By clicking on the "Show" button you receive further information about the selected
diagnostic line.
Configuration of Redundant I/O Modules
Entry-ID: 28430682, V2.0, 03/2015
69