Siemens SIMATIC PCS 7 Configuration page 17

2 Configuring and wiring
2.2 Connecting an MTA terminal module
Connection example of sensors to the screw-type terminals on the MTA
The following figure shows the encoder connection using the example of digital
inputs.
Figure 2–3
Connection channel 1 Connection channel 1
Anschluss Kanal 13 Anschluss Kanal 13
Connection channel 13 Connection channel 13
Note For more detailed information, refer to the "ET 200M Marshalled Termination
Assemblies Remote I/O Modules".
Configuration of Redundant I/O Modules
Entry-ID: 28430682, V2.0,
Anschluss Kanal 1 Anschluss Kanal 1
03/2015
17