Siemens SIMATIC PCS 7 Configuration page 49

3 Configuring the redundant peripherals
3.5 Signal module settings
Activity
3. Then select the "Redundancy" tab.
In the "Redundancy" drop-down list,
select the entry "2 modules".
4. Click on the "Find" button. The dialog
window "Find Redundant Module" opens.
5. In the "Subsystem" list, select the DP
master system in which the redundant
signal module is configured.
All PROFIBUS addresses, available on this
DP master system, are displayed in the
field "PROFIBUS Address".
6. In the field "PROFIBUS Address", select
the IM 153-2 in which the redundant signal
module is configured. The redundant
module field: shows the redundancy
capable signal modules available in this
IM 153-2, for which no redundancy has
yet been configured.
In the Redundant module field, select
the signal module which is to be used as
a redundant signal module and click the
"OK" button.
Configuration of Redundant I/O Modules
Entry-ID: 28430682, V2.0, 03/2015
Screenshot
49