Report Routing - Bosch B9512G Installation Manual

30 en | ULC Installation Guide
Required for B6512/B5512/B4512/B3512 control panels
PANEL Wide Parametes> Report Routing
In the Route Group 4 column:
–
–
–
Figure 1.21: Report Routing
PANEL WIDE PARAMETERS > Report Routing > Diagnostic
Reports
For the Route Group 4 column, set SDI2 Device Failure to Yes.
Set the remaining reports to No.
2019.06 | 02 | F.01U.321.698
Set Fire Reports, Gas Reports, Burglar Reports, Personal
Emergency Reports, User Reports, and Test reports to No.
Set Output Reports, Auto Function Reports, RPS Reports,
Point Reports, User Change Reports, and Access Reports to
No.
Verify Diagnostic Reports is set to Custom. The next steps
configure the Custom settings.
Control Panels
Bosch Security Systems B.V.