Juniper Archer 3 Owner's Manual page 38

Declaration of Conformity
The Declaration of Conformity for CE Marking is available
at: http://www.junipersys.com/doc.
Class I and LED Product (Barcode Scanner)
CLASSIFIED EN/IEC 60825-1 2007 & AS/NZS 2211.1:2004"
Complies with 21 CFR 1040.10 & 1040.11 except for
deviations pursuant to Laser Notice No. 50 dated June 24,
2007.
!
CAUTION: Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
This barcode scanner is not user-serviceable. Units requiring
service or repair must be returned to the factory.
This barcode scanner is not to be opened or modified
by the user. This product does not require scheduled
maintenance to remain compliant to the applicable
standards.
This laser product is designated as Class 1 during all
procedures of operation. For instructions on activating/
deactivating the laser aimer and LEDs, please read the
section on software operation.
Laser
Wavelength
Emission
Pulse Energy*
Pulse Width
Pulse Rep Rate
Divergence
Classification
LED (Australia New Zealand only)
Wavelength
Bandwidth FWHM
Emission
Pulse Energy*
34
Archer 3 Rugged Handheld Owner's Manual
650nm, nominal
Repetitive Pulsed
7uJ
9 mSec
55Hz, nominal
1 Radian XY, approximately
Class 1
635nm, peak
20nm
Repetitive Pulsed
<3.1uJ