The Installation Menu - Sony VPL-CX100 Operating Instructions Manual

The Installation Menu

The Installation menu is used for changing the settings of the projector.
V Keystone:
Picture
Side Shot:
Image Flip:
Signal
Background:
Lamp Mode:
Function
IR Receiver:
ID Mode:
Installation
Direct Power On:
Setup
High Altitude Mode:
Information
Sel:
Setting items Functions
V Keystone Corrects the trapezoidal distortion caused by the projection
angle. Select "Auto" for automatic correction, or "Manual"
for manual correction using the v/V/b/B keys.
When the bottom of the trapezoid is longer than the top
When the top of the trapezoid is longer than the bottom
Side Shot Corrects the horizontal trapezoidal distortion of the picture
(VPL-CX125/ using the v/V/b/B keys.
CX155/CW125 When the right side is longer than the left side (
only) Set to a higher value (+ direction).
When the left side is longer than the right side (
Set to a lower value (– direction).
Set the adjustment level to "0" if you want to adjust the
picture more widely using "V Keystone" only.
Image Flip Flips the image on the screen horizontally and/or vertically.
• Off: The image does not flip.
• HV: Flips the image horizontally and vertically.
• H: Flips the image horizontally.
• V: Flips the image vertically.
Background Selects the background color of the screen when no signal
is input to the projector. Select "Black" or "Blue."
Normally, set to "Blue."
Lamp Mode Sets the lamp brightness used during the projection.
• High: Illuminates the projected image brightly.
• Standard: Reduces fan noise and power consumption.
The brightness of the projected image will be lower
compared with the "High" setting.
IR Receiver Selects the remote control detectors (IR Receiver) on the
front and rear of the projector.
• Front & Rear: Activates both the front and rear
detectors.
• Front: Activates the front detector only.
• Rear: Activates the rear detector only.
Auto
0
Off
Blue
Standard
Front & Rear
All
Off
Off
Set: Exit:
: Sets a lower value.
: Sets a higher value.
Initial setting
Auto
0
)
)
Off
Blue
Standard
Front & Rear
The Installation Menu
41