The Signal Menu - Sony VPL-CX100 Operating Instructions Manual

The Signal Menu

The Signal menu is used to adjust the input signal.
Adjust Signal...menu (When the signal is input from a computer)
Adjust Signal
Picture
Aspect:
Signal
Function
Installation
Setup
Information
Sel:
Setting items Functions
Adjust Signal...
Dot Phase Adjusts the dot phase of the LCD panel and the signal
output from a computer.
Adjust the picture further for finer picture after the
picture is adjusted by pressing the APA key.
H Size Adjusts the horizontal size of a picture output from a
computer. Adjust the setting according to the dots of
the input signal.
For details, see page 57.
Shift Adjusts the position of the picture. H adjusts the
horizontal position of the picture.V adjusts the vertical
position of the picture. As the setting for H increases,
the picture moves to the right, and as the setting
decreases, the picture moves to the left.
As the setting for V increases, the picture moves up,
and as the setting decreases, the picture moves down.
Use the
position and the
Aspect (When the You can set the aspect ratio of the picture to be
video signal is displayed for the current input signal. This item is
input) enabled only when an video signal (preset memory
numbers 1 to 11) is input.
• Full 2: The original image is projected fully in the
• 4:3: Select to view a picture with normal 4:3 aspect
• 16:9: Select to view a picture squeezed.
Full 1
Set: Exit:
b B
or the key to adjust the horizontal
v V
and
window.
ratio.
Adjust Signal
Picture
Dot Phase:
H Size:
Signal
Shift:
Function
Installation
Setup
Information
Sel: Set:
key for the vertical position.
12
1344
H: 235 V: 34
Back: Exit:
Initial setting
Set according to
the input signal
Set according to
the input signal
Set according to
the input signal
Set according to
the input signal
The Signal Menu
37