Initializing The Tpm For Bitlocker Users; Initializing The Tpm For Txt Users - Dell PowerEdge M630 Owner's Manual

Figure 60. Installing the TPM
1. TPM
3. slot on the TPM connector
5. slot on the system board
Next steps
1. Install the systemboard.
2. Followthe procedure listed inthe After working inside your system section.
Related links
Safety instructions
System board connectors

Initializing the TPM for BitLocker users

Initialize the TPM.
For more information about initializing the TPM, see http://technet.microsoft.com/en-us/library/cc753140.aspx.
The TPM Status changes to Enabled, Activated.

Initializing the TPM for TXT users

1.
While booting your system, press F2to enter System Setup.
2. On the System Setup Main Menu screen, click System BIOS→System Security Settings.
3. From the TPM Security option, select On with Pre-boot Measurements.
4. From the TPM Command option, select Activate.
5.
Save the settings.
6.
Restart your system.
7. Enter System Setup again.
8. On the System Setup Main Menu screen, click System BIOS→System Security Settings.
9. From the Intel TXT option, select On.
2. TPM connector
4. plastic bolt
109