Omron CJ-Series Operation Manual page 86

Auxiliary Area Data Allocation
Name Address
High-speed Counter A27415
0
CTBL(882) Instruc-
tion Execution Flag
High-speed Counter A27500
1
Range 1 Compari-
son Condition Met
Flag
High-speed Counter A27501
1
Range 2 Compari-
son Condition Met
Flag
High-speed Counter A27502
1
Range 3 Compari-
son Condition Met
Flag
High-speed Counter A27503
1
Range 4 Compari-
son Condition Met
Flag
High-speed Counter A27504
1
Range 5 Compari-
son Condition Met
Flag
High-speed Counter A27505
1
Range 6 Compari-
son Condition Met
Flag
High-speed Counter A27506
1
Range 7 Compari-
son Condition Met
Flag
High-speed Counter A27507
1
Range 8 Compari-
son Condition Met
Flag
High-speed Counter A27508
1
Comparison In-
progress Flag
Description
ON only when the CTBL(882) instruction is
being executed for high-speed counter 0, i.e., a
comparison table is registered for high-speed
counter 0.
To prevent interrupt conflicts, the system checks
the status of this flag before executing an
INI(880) instruction (specifying a high-speed
counter) or CTBL(882) instruction.
These flags indicate whether the PV is within the
specified ranges when high-speed counter 1 is
being operated in range-comparison mode.
0: PV not in range
1: PV in range
This flag indicates whether a comparison opera-
tion is being executed for high-speed counter 1.
0: Stopped.
1: Being executed.
Section 4-3
Read/Write Times when data is
accessed
Read only • Cleared when
power is turned
ON.
• Cleared when
operation starts.
• Refreshed when a
CTBL(882)
instruction is exe-
cuted.
Read only • Cleared when
power is turned
ON.
• Cleared when
operation starts.
• Refreshed each
Read only
cycle during over-
seeing process.
• Refreshed when
PRV(881) instruc-
tion is executed
for the corre-
Read only
sponding counter.
Read only
Read only
Read only
Read only
Read only
Read only • Cleared when
power is turned
ON.
• Cleared when
operation starts.
• Refreshed when
comparison oper-
ation starts or
stops.
67