Version Display Mode; Starting Up; Display Order - Denon AVR-S730H Service Manual

1. Version Display Mode

1.1. Actions
Version information is displayed when the device is started in this mode.

1.2. Starting up

While holding down buttons "DIMMER" and "STATUS" simultaneously, press the power button to turn
on the power.
then press the "STATUS" button to display the information in section 1.3 on the display.
b The version list is also displayed on GUI while the version is displayed on the display.

1.3. Display Order

Error information(See "1.4. Error display") → q Model destination information → w Serial Number
→ e Firmware Package → r Main μ -com → t Main 1st Boot Loader → y DSP
→ u Audio PLD → i GUI SFLASH → o HIMG → Q0 HEOS Version → Q1 HEOS Build → Q2 HEOS Module
→ Q3 HEOS Configuration → Q4 HEOS Locale → Q5 Ether Mac Address → Q6 WiFi Mac Address
→ Q7 BT Mac Address → Q8 Audyssey App Interface Version
q Model destination information :
AVR-S730H E3 *
AVR-X1400H \\\ *
\ : Region (E3, E2, E1C, JP)
w Serial Number :
SN**************
e Firmware Package :
Package :****
r Main µ-com :
M:*************
t Main 1st Boot Loader :
Main FBL :**.**
y DSP ROM :
DSP :**.**
u Audio PLD :
Audio PLD:**.**
i GUI SFLASH :
GUI :@@$\****
@ : Model code, $ : Brand code (DENON=1),
\ : Region code (E3=1, E2=2, E1C=5, JP=4,
ALL=0), * : version
o HIMG :
HIMG :********
Q0 HEOS Version :
HEOS Version
"Press "STATUS" button.
*.***.***
Q1 HEOS Build :
HEOS Build
"Press "STATUS" button.
******
Q2 HEOS Module :
HEOS Module
"Press "STATUS" button.
***
Q3 HEOS Config :
HEOS Config
"Press "STATUS" button.
Production
Q4 HEOS Locale :
HEOS Locale
"Press "STATUS" button.
*****
109
Q5 Ether MAC Address :
*Ether MAC
"Press "STATUS" button.
******-******
Q6 Wi-Fi MAC Address :
*Wi-Fi MAC
"Press "STATUS" button.
******-******
Q7 Bluetooth MAC Address :
*BT MAC Address
"Press "STATUS" button.
******-******
Q8 Audyssey App Interface Ver :
Audy IFVer:**.**