Wiring The Components - Siemens Sinamics S120 Getting Started

Hardware components

4.3 Wiring the components

4.3 Wiring the components
The components of this example are assembled and wired into the SINAMICS training case.
No changes to this wiring are permitted. For the purpose of commissioning this project
example, it is not permissible to connect other components or drive loads to the motor.
Figure 4-2
Note
The following description only refers to one of the two motors.
32
Wiring principle
Getting Started with STARTER
Getting Started, 11/2017, 6SL3097-4AG00-0BP5