Siemens Sinamics S120 Getting Started page 40

Creating a drive object
5.3 Creating a drive project
6. Click on "Continue >".
The project wizard continues to step 4 to display a summary of your project settings.
Figure 5-8
7. Click on button "Complete".
The project wizard closes the window.
In the project navigator, the found drive unit "S120_CU320_2_DP" is then displayed under
the sample project.
Figure 5-9
40
Summary
Drive object created
Getting Started with STARTER
Getting Started, 11/2017, 6SL3097-4AG00-0BP5