Henny Penny HC-5 Operator's Manual page 15

3-2. OPERATING CONTROLS AND COMPONENTS (Continued)
Fig. Item
No. No.
3-1 1 Power Switch
3-1 2
3-1 3 Thermometer
3-1 4
3-1 5
3-2 6 Blower Motor
3-2 7
3-2 8
3-3 9
3-4 10
Venting System
3-5 11 (Units with vent
adjustment only)
3-2
Description
A toggle switch that switches electrical current to the unit
Illuminates when the power switch is in the ON position and
Power Light
the components are energized
Indicates the air temperature inside the cabinet
Heat Light Illuminates when the thermostat turns on the heaters
An electromechanical device that controls the temperature
Thermostat
inside the cabinet
Used to recirculate the hot humid air throughout the cabinet;
there are two blower motor assemblies in the cabinets
Two, open-resistance, wire type heaters that provide heat
throughout the cabinet; a standard full sized 120 VAC unit
Heater will have 1000 watt heaters; a standard full sized 240 VAC
unit will have 1500 watt heaters; a standard 120V, HHC-903
unit will have 750 watt heaters
A safety device mounted next to the heater which protects the
High Limit
unit from overheating
A protective device that breaks the circuit when current ex-
ceeds the rated value; the fuse provides an overload protection
Fuse
for the electrical components; to remove the fuse, twist and
pull the cap; the fuse is used only on the 120V/2000 watt units
Water Pan Holds the water for creating humidity in the cabinet
Controls the humidity levels in the cabinet
Model HHC-90X/Model HC-5/15
Function
Dec. 2016